Fabrication of submicrometer-grained Zn–22% Al by torsion straining

Abstract

The Zn–22% Al eutectoid alloy is capable of exhibiting very high superplastic elongations, in excess of 2000% in tension, when the grain size is in the range of ∼ 1–10μm. This paper describes the fabrication of a submicrometer grain size in the Zn–22% Al alloy by subjecting the samples to intense plastic straining in torsion under high pressure (∼5 GPa) at room temperature. Observations after straining revealed a heterogeneous microstructure with grain sizes in the range of ∼0.1–0.5μm. As a result of the low melting temperature of the alloy, the high internal stresses introduced by torsion straining are relaxed and the grain boundaries are close to an equilibrium configuration.