Real-Time FT-IR Studies Of The Reaction Kinetics For The Polymerization Of Divinyl Siloxane Bis-Benzocyclobutene Monomers

Abstract

ABSTRACTThe thermal polymerization reaction of divinyl siloxane bis-benzocyclobutene (DVS bis-BCB) was monitored in-situ with FT-IR spectroscopy in order to follow specific chemical changes and determine the reaction order and rate constants at temperatures from 150° to 210°C. FT-IR spectra were obtained at regular intervals throughout the reaction with a Nicolet 170SX spectrophotometer.Monomeric DVS bis-BCB contains mixed stereo and positional isomers of 1,3- bis(2-bicyclo[4.2.0]octa-1, 3, 5-trien-3-ylethenyl)-1, 1, 3, 3-tetramethyl disiloxane (CAS 117732-87-3). It polymerizes via Diels-Alder cycloaddition reactions between vinyl groups and an intermediate o-quinodimethane formed by first-order, thermally initiated ring openings of the benzocyclobutene rings. Gaseous byproducts are not produced; therefore, the cure is easier to manage than are cures for polyimides which evolve water in polycondensation reactions. The DVS bis-BCB has four reactive elements per monomer unit and, thus, polymerizes into a very highly cross linked and solvent resistant network.With the FT-IR methodology, the reaction was easily monitored through the points of gel formation and vitrification. With the exception of DSC (i.e., calorimetry) which does not sense specific chemistry, other methods were not successful in following the reaction after a gel was formed. We have found that the polymerization was first-order until vitrification occurs; the gelation alone had no apparent effect on the reaction rate.DVS bis-BCB is under development at Dow as high performance dielectric material for multilayer interconnect coating applications for the microelectronics industry. Methodology reported here is employed in developing effective cure management strategies.