High temperature creep strength in a nanodispersion-strengthened ferritic alloy prepared by heavy plastic deformation

Abstract

ABSTRACTProcesses of severe plastic deformation have been investigated for a wide range of ductile alloys over the past decade, generally with an objective of refining the microstructural scale, for example the grain size, but have hardly been considered for intermetallics. This presentation discusses processing of a boride-containing Fe3Al alloy using a multidirectional, high-strain and high-temperature forging technique. Iron aluminides with relatively low Al contents can be regarded as Al-rich ferritic steels with outstanding oxidation-corrosion properties. However, as for many ferritic steels, they show poor creep resistance at temperatures above about 600ºC. The deformation processing leads to a material with large grain size and refined dispersion of thermally-stable boride particles. The particles produce a large increase in creep strength under conditions of moderate stresses and low strain rates at temperatures near 700ºC. This high-strain forging technique can be seen as an intermediate processing method between conventional wrought metallurgy and mechanical-alloying powder metallurgy, whereby an initially coarse and inhomogeneous dispersion of second phase is refined and made more homogeneous, and can be considered as a useful processing technique for a wide range of particle-containing materials.