Ozone Gas Generator Using Uniaxially Polarized LiTaO3 Single Crystal

Abstract

AbstractThe phenomenon that a ferroelectrics crystal carries out intrinsic polarization by the temperature change generally is known. The Ozone gas generation was investigated due to a strong electric field of this crystal under atmospheric pressure . When we added a rapid temperature change to the crystal, the charge non–equilibrium occurs around the crystal. Oxygen is influenced due to the non-equilibrium in charge and ozone is considered to be generated. Therefore, we used the high electric field induced due to the polarization of a ferroelectrics crystal in order to produce the ozone under atmospheric pressure.As a result, we were able to produce ozone of the density of 400ppb in a oxygen gas flow of 1.5 liters per minute using this simple system: The crystals (Yamaju Co. Ltd. and Sumitomo metal mining Co. Ltd.) are used in thickness of 3, 5, 7, 10, 20, and 30 mm with a diameter of 4 inches, respectively. They are poled crystals.Experiments on the maximum temperature (300 degree), the temperature gradient (100 degree/10 minite), and substrate materials(Cu and Al), the thickness of the crystal, and z face etc. were carried out during the temperature of LiTaO3 single crystal from 20C to about 300C. It is found that the amount of the ozone production increases rapidly, when the maximum temperature of LiTaO3 single crystal is raised and have a relation with the thickness of the crystal. However, the amount of the ozone production doesn't closely related with the X-ray generation that we use the crystal for.In the present study, when the thickness of the crystal became large, polarization voltage became high, but generated efficiency of ozone was not necessarily proportional to thickness.