In-Situ Studies of the Formation Sequence of Silicides During Vacuum (10-7 TORR)Thermal Annealing of TI/Polysilicon Bilayers

Abstract

ABSTRACTThe formation of suicides during the thermal reaction of Ti/polysilicon bilayers has been investigated using both in-stu four point sheet resistance measurements and ex-situ measurements including X-ray diffraction, cross-sectional transmission electron microscopy and Auger electron spectroscopy. For a series of samples annealed at a ramp rate of 10°C/min the following sequence of changes in the bilayers occurred. At temperatures exceeding 350°C and prior to the silicidation oxygen from the vacuum system diffuses into the Ti film forming a solid solution of Ti(O) with O levels up to 20 %. An amorphous TixSiy layer is the first major suicide reaction observed at temperatures near 440°C. The first major crystalline phase is observed at 500°C and identified as C49 TiSi2. This phase was found to coexist at these temperatures with the partially consumed Ti(O) and the amorphous TixSiy layers. Further annealing above 700 °C results in the final structural transformation from C49 TiSi2 to C54 TiSi2.