Author:
Tang J.,Feng L.,Mao D.,Song W.,Zhu Y.,Trefny J. U.
Abstract
AbstractVacuum-evaporated Cu-doped ZnTe films have been studied as the intermediate layer between CdTe and metal contacts in CdTe/CdS thin-film solar cells for the formation of low resistance back contacts. Different metals (Au, Ni, Co) have been investigated as the contact material to the ZnTe layer. The effects of Cu concentration, ZnTe:Cu layer thickness, and ZnTe post-deposition annealing temperature on the cell performances have been investigated. We found that different metal contacts on the ZnTe layer lead to different doping densities in the CdTe layer and different open-circuit photovoltages of the solar cells. The possible formation of a back contact diode at the CdTe/ZnTe interface was explored, based on capacitance-voltage analysis. The series resistance of the CdTe/CdS cells was reduced significantly by the introduction of the ZnTe layer. Fill factors greater than 0.76 and an energy conversion efficiency of 12.9% have been achieved using ZnTe back contacts on electrodeposited CdTe.
Publisher
Springer Science and Business Media LLC
Reference9 articles.
1. Effects of Cu on CdTe / CdS Heterojunction Solar Cells with Au/Cu Contacts
2. Dependence of material properties of radio‐frequency magnetron‐sputtered, Cu‐doped, ZnTe thin films on deposition conditions
3. 3. Mondal A. , Birkmire R.W. , and McCandless B.E. , Proceedings of the 22nd IEEE Photovoltaic Specialist Conference (IEEE, New York, 1991) p. 1126.
4. 1. Meyers P.V. , “Polycrystalline Cadmium Telluride n-i-p Solar Cell,” Annual Report to SERI under Subcontract No. ZL-7-06031-2 (1988).
5. 2. Meyers P.V. , “Polycrystalline Cadmium Telluride n-i-p Solar Cell,” Final Report to SERI under Subcontract No. ZL-7-06031-2 (1990).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献