Novel yttrium-stabilized zirconia polymeric precursor for the fabrication of thin films

Abstract

An acetate-based polymeric precursor for producing yttrium-stabilized zirconia (YSZ) was developed. The precursor was prepared under ambient conditions and contains only yttrium and zirconium cations. Dense, crack-free films were fabricated with this precursor on alumina substrates at a rate of 60 nm per deposition, producing polycrystalline YSZ at temperatures as low as 600 °C. Grain growth in thin YSZ films followed Arrhenius equation with an activation energy approximately 0.45 eV. The residual strain in YSZ films decreased with increasing annealing temperature from 600 to 900 °C.