Affiliation:
1. Institute of Applied Physics of the National Academy of Science of Belarus
Abstract
Application of surface and subsurface waves for control of objects with a double-layer structure allows to extend possibilities of diagnostics of their physico-mechanical properties. The purpose of work was to determine conditions and offer recommendations providing measuring of ultrasonic velocity and amplitude of the former modes in protective layers and in basis of object at one-sided access to its surface.The analysis of an acoustic path of a measuring system in relation to ultrasonic evaluation of the objects having the restricted sizes and the protective coating according to velocity data of the surface and subsurface waves propagation is made. On the basis of representations of beam acoustics the dependences connecting a wavelength of the excited surface and subsurface modes, thickness and width of a controlled object, acoustic base of a sounding are defined. There are to provide a condition leveling of the influence of an acoustical noise created by the reflected and accompanying waves on parameters of acoustic signal with the given quantity of oscillations in an impulse.The principle opportunity is shown and conditions for determination of velocity of subsurface body waves in the base material which is under a protective coating layer are established. For these purposes on the basis of use of the block of ultrasonic probes the optimum scheme of a sounding is offered and the analytical expression for calculation of required velocity considering varying of thickness of a covering is received.The method of acoustical measuring realized by a direct and reverse sounding of the objects with small aperture and angle probes was analysed and formulas for determination of speed of subsurface wave under protective layer of the wedge form have been got. An ultrasonic device is suggested for the excitationreception of subsurface waves with different speed in objects (on 20–35 %) using for the acoustic concordance of environments of metallic sound duct as a wedge. Possibility of leveling of interference in a protective layer to control efects in basis of material by a volume wave by creation of supporting echo-signal of longitudinal wave of the set frequency and entered normally to the surface of object was studied.
Publisher
Belarusian National Technical University
Subject
General Earth and Planetary Sciences,Water Science and Technology,Geography, Planning and Development
Reference10 articles.
1. Razygraev, N.P., Razygraev, A.N. Ultrasonic testing of austenite welded joints in y-300 pipelines. Russian Journal of Nondestructive Testing, 2006, vol. 42, no. 10, pp. 682–691. DOI:10.1134/s106183090610007x.
2. Golden Song S.-J., Kim D.Y., Kwon S.D., Kim H.J. Evaluation of thin coating layers using Rayleighlike waves. Review of Progress in Quantitative Nondestructive Evaluation, Colorado, 2007, vol. 27B, pp. 1066–1073.
3. Kruger S.E., Lord M., Levesque D., Bakker A.J. Detection of kissing bond in extruded aluminum by laserultrasound.ReviewofProgressinQuantitativeNondestructive Evaluation, Golden, Colorado, 2007, vol. 27A, pp. 279–285. DOI: https://doi.org/10.1063/1.2902670
4. Baev A.R., Asadchaya M.V. Specifi Features of Excitation and Propagation of Longitudinal and Transverse Subsurface Waves in Solids: II. Effects of Some Boundary Conditions on Formation of Acoustic Fields. Russian Journal of Nondestructive Testing, 2005, vol. 41, no. 9, pp. 577– 585. DOI: https://doi.org/10.1007/s11181-006-0004-9
5. Pecorary C. Nonlinear interaction of plane ultrasonic waves with an interface between rough surfaces in contact / C. Pecorary // J. Acoust. Soc. Amer. – 2003. – Vol. 113. – P. 3065–3072. DOI: https://doi.org/10.1121/1.1570437