Capacitive Sensor for Monitoring the Condition of Suspended High-Voltage Insulation

Abstract

The purpose of the work is to develop the design of a sensor for monitoring the condition of high-voltage power lines suspended insulation. To achieve this goal, a diagnostic criterion was selected, the operating principle and design of the insulation monitoring sensor were determined. As a diagnostic criterion is considered a changing of voltage on the insulator plate due to a change in the distribution of electrical potential on the insulators, caused of damage in the insulators string. For the diagnostic system implementation was adopted a sensor based on a capacitive divider. The calculations confirm the pos-sibility of registration a damaged element in a insulators string by getting of voltage change at the sen-sors output. The calculation results were verified by modeling in the Multisim software. The parameters of the sensor were calculated, correctness of it is confirmed by the results of laboratory measurements of the new insulators plate capacitances, as well as insulators destroyed as a result of operation. The most important results of the research are the selection of the optimal diagnostic criterion and research-ing of the proposed design sensor effectiveness for assessing the suspended insulation condition. The significance of the results obtained lies in the fact that the developed design of a sensor allows one to obtain prompt information about the presence of damage in the insulation. The use of the proposed sensor design will make possible creation a continuous diagnostic system and identify damage at an early stage, which will ensure timely maintenance.