Reduction of a fan vibration activity in a life support system of oil and gas stations

Abstract

Relevance. Electromechanical fans are widely used in life support systems of oil and gas stations, operate in conditions of vibration, high rotational speeds and loads. Design, technological and operational reasons influence vibration activity of an electromechanical device. The greatest "contribution" to the existing vibrations, according to the frequency spectrum, is made by the imperfection of the design elements of the ball bearing. They are: separator movement, variable stiffness under the action of radial load, interaction of micro-dimensions of working surfaces, facet and waviness of working surfaces of rings and balls. In addition, the resulting vibrations negatively affect both the reliability and durability of the fan. Since it is technically impossible to completely eliminate the vibration activity of an electromechanical device, it is advisable to reduce it with the help of a technical solution by introducing a damping element into a kinematic circuit of the vibration source. In this regard, the development of a damping device is an integral technical task that helps to reduce the vibration activity of technical life support systems of oil and gas stations, as well as to improve the quality of environmental conditions of human life. To reduce vibration activity, a damper design is proposed that takes into account various types of energy dissipation. However, given the dense spectrum of vibration frequencies from ball bearings, a viscous friction element is introduced into the damper design. To determine the effectiveness of reducing vibration activity, a model of the damper in question was made based on the developed 3D model. For tests in determining the effectiveness of applying a viscous friction element, two variants of the damper design were used. In the first version of the damper design, there was no viscous friction element, and in the second version there was one. According to the test results of the damper layouts, it can be seen that the developed technical solution to reduce the vibration activity of the electromechanical device has practical confirmation. The studies underlying the developed design of the damper with a viscous friction element allows for reduction in the vibration amplitude. Object. Electromechanical device in operating mode. Aim. To describe the vibration activity in the operating mode of an electromechanical device in the entire spectrum of disturbing effects acting along the axes, taking into account the imperfect geometry of ball bearing parts; to develop a damper for reducing the vibration activity level in the electromechanical device. Methods. Vibration diagnostics, computational mathematics, measuring instruments, software "Vibration recorder-F", "Vibration Recorder-M2", "Logger"-recorder and "Bearing". Results. The paper demonstrated the effectiveness of the proposed technical solution to reduce the vibration amplitude in the operating frequency range of the electromechanical device rotor up to 4 times compared with the corresponding maximum amplitude value without its use.