Changes in Mechanical Properties of Fabrics Made of Standard and Recycled Polyester Yarns Due to Aging

Author:

Katić Križmančić Ines12,Salopek Čubrić Ivana2ORCID,Potočić Matković Vesna Marija2ORCID,Čubrić Goran2ORCID

Affiliation:

1. 2 K ideja d.o.o., 10000 Zagreb, Croatia

2. University of Zagreb Faculty of Textile Technology, 10000 Zagreb, Croatia

Abstract

Over the years, the demands on the durability and quality of polyester fabrics used for sportswear have increased, as these fabrics contribute to athletes’ performance. At the same time, the use of recycled polyester material is increasingly being promoted for environmental reasons. This study focused on investigating the properties of standard and recycled polyester fabrics before and after aging according to the developed aging protocol. The surface morphology, thickness, elongation at break, force at break, bursting force, mass loss due to abrasion and moisture management of the fabrics were tested. The results showed that the aging process had no influence on the surface changes in the fabrics. More specifically, there were neither surface cracks on the fibre surface nor chemical changes. The highest decrease in force at break for standard polyester fabrics with elastane was up to 26%, and up to 15% for fabrics made of recycled polyester. The loss of mass due to abrasion was greater for recycled polyester than for standard polyester fabrics. The average ability of the fabrics to absorb moisture decreased by up to 23% after aging, while the wetting time increased by up to 30%, with the highest increase observed in recycled fabrics.

Funder

Croatian Science Foundation

Publisher

MDPI AG

Subject

Polymers and Plastics,General Chemistry

Reference30 articles.

1. Venkatraman, P., and Hayes, S.G. (2018). Materials and Technology for Sportswear and Performance Apparel, CRC Press.

2. Shishoo, R. (2015). Textiles for Sportswear, Elsevier Science.

3. McKeen, L.W. (2013). The Effect of UV Light and Weather on Plastics and Elastomers, Elsevier.

4. McKeen, L.W. (2007). Effect of Temperature and other Factors on Plastics and Elastomers, Elsevier. [2nd ed.].

5. Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources (Standard No. ASTM G151-10).

Cited by 3 articles. 订阅此论文施引文献 订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献

同舟云学术

1.学者识别学者识别

2.学术分析学术分析

3.人才评估人才评估

"同舟云学术"是以全球学者为主线,采集、加工和组织学术论文而形成的新型学术文献查询和分析系统,可以对全球学者进行文献检索和人才价值评估。用户可以通过关注某些学科领域的顶尖人物而持续追踪该领域的学科进展和研究前沿。经过近期的数据扩容,当前同舟云学术共收录了国内外主流学术期刊6万余种,收集的期刊论文及会议论文总量共计约1.5亿篇,并以每天添加12000余篇中外论文的速度递增。我们也可以为用户提供个性化、定制化的学者数据。欢迎来电咨询!咨询电话:010-8811{复制后删除}0370

www.globalauthorid.com

TOP

Copyright © 2019-2024 北京同舟云网络信息技术有限公司
京公网安备11010802033243号  京ICP备18003416号-3