Affiliation:
1. Department of Mechanical and Aerospace Engineering, School of Engineering and Digital Sciences, Nazarbayev University, Astana 010000, Kazakhstan
Abstract
Rapid investment casting is a casting process in which the sacrificial patterns are fabricated using additive manufacturing techniques, making the creation of advanced designs possible. One of the popular 3D printing methods applied in rapid investment casting is stereolithography because of its high dimensional precision and surface quality. Printing parameters of the used additive manufacturing method can influence the surface quality and accuracy of the rapid investment cast geometries. Hence, this study aims to investigate the effect of stereolithography printing parameters on the dimensional accuracy and surface roughness of printed patterns and investment cast parts. Castable wax material was used to print the sacrificial patterns for casting. A small-scale prosthetic biomedical implant for total hip replacement was selected to be the benchmark model due to its practical significance. The main results indicate that the most significant stereolithography printing parameter affecting surface roughness is build angle, followed by layer thickness. The optimum parameters that minimize the surface roughness are 0.025 mm layer thickness, 0° build angle, 1.0 support density index, and across the front base orientation. As for the dimensional accuracy, the optimum stereolithography parameters are 0.025 mm layer thickness, 30° build angle, 0.6 support density index, and diagonal to the front base orientation. The optimal printing parameters to obtain superior dimensional accuracy of the cast parts are 0.05 mm layer thickness, 45° build angle, 0.8 support density index, and diagonal to the front model base orientation. With respect to the surface roughness, lower values were obtained at 0.025 mm layer thickness, 0° build angle, 1.0 support density index, and parallel to the front base orientation.
Funder
Ministry of Industry and Infrastructure Development of the Republic of Kazakhstan
Subject
Polymers and Plastics,General Chemistry
Reference40 articles.
1. Mukhtarkhanov, M., Perveen, A., and Talamona, D. (2020). Application of Stereolithography Based 3D Printing Technology in Investment Casting. Micromachines, 11.
2. Concise review on Pattern making process in Rapid Investment Casting: Technology, Materials & Numerical modelling aspect;Badanova;Adv. Mater. Process. Technol.,2022
3. Rapid prototyping—A technology transfer approach for development of rapid tooling;Thakare;Rapid Prototyp. J.,2009
4. Rapid investment casting: Direct and indirect approaches via model maker II;Chua;Int. J. Adv. Manuf. Technol.,2005
5. Rapid casting solutions: A review;Chhabra;Rapid Prototyp. J.,2011