Catalytic Hydrothermal Liquefaction of Penicillin Residue for the Production of Bio-Oil over Different Homogeneous/Heterogeneous Catalysts

Abstract

In this study, penicillin residue (PR) was used to prepare bio-oil by hydrothermal liquefaction. The effects of homogeneous (organic acid and alkaline catalysts) and heterogeneous catalysts (zeolite molecular sieve) on the yield and properties of bio-oil were investigated. The results show that there are significant differences in the catalytic performance of the catalysts. The effect of homogeneous catalysts on the bio-oil yield was not significant, which only increased from 26.09 (no catalysts) to 31.44 wt.% (Na2CO3, 8 wt.%). In contrast, heterogeneous catalysts had a more obvious effect, and the oil yield reached 36.44 wt.% after adding 5 wt.% MCM-48. Increasing the amount of catalyst enhanced the yield of bio-oil, but excessive amounts of catalyst led to a secondary cracking reaction, resulting in a reduction in bio-oil. Catalytic hydrothermal liquefaction reduced the contents of heteroatoms (oxygen, mainly), slightly increased the contents of C and H in the bio-oil and increased the higher heating value (HHV) and energy recovery (ER) of bio-oil. FTIR and GC-MS analyses showed that the addition of catalysts was beneficial in increasing hydrocarbons and oxygen-containing hydrocarbons in bio-oil and reducing the proportion of nitrogen-containing substances. Comprehensive analyses of the distribution of aromatic, nitrogen-containing and oxygen-containing components in bio-oil were also performed. This work is beneficial for further research on the preparation of bio-oil by hydrothermal liquefaction of antibiotic fermentation residue.