Abstract
Cold-formed steel (CFS) storage rack structures are extensively used in various industries to store products in safe and secure warehouses before distribution to the market. Thin-walled open profiles that are typically used in storage rack structures are prone to loss of stability due to different buckling modes such as local, distortional, torsional and flexural, or any interaction between these modes. In this paper, an efficient way of increasing ultimate capacity of upright frames under compression load is proposed using bolts and spacers which are added externally to the section with certain pitches along the height. Hereinto, experimental tests on 81 upright frames with different thicknesses and different heights were conducted, and the effect of employing reinforcement strategies was examined through the failure mode and ultimate load results. Non-linear finite element analyses were also performed to investigate the effect of different reinforcement spacing on the upright performance. The results showed that the reinforcement method could restrain upright flange and consequently increase the distortional strength of the upright profiles. This method can also be effective for any other light gauged steel open section with perforation. It was also observed that the reinforcement approach is much more useful for short length upright frames compared to the taller frames.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Cited by
31 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献