Low Emissions Resulting from Combustion of Forest Biomass in a Small Scale Heating Device

Abstract

The paper concerns the analysis of harmful emissions during the combustion process in households. The subject of the analysis is a low emission heating device with an output of 50 kW for burning biomass of forest origin (low-quality hardwoods or softwoods). The proposed boiler is automatically fed from the connected container by means of a screw conveyor. In this way, the optimum amount of fuel is supplied for maximum heat output (adjustment of the ratio of primary air to fuel). The proposed biomass heating system is equipped with a primary and secondary air supply system and exhaust gas sensors. This ensures optimal regulation of the air mixture and efficient and clean combustion. Proper control of the combustion process, control of the air supply by means of a lambda sensor and power control of the system ensure a low-emission combustion process. The system precisely adjusts to the heat demand. This results in highly efficient heating technology with low operating costs. In the presented work, the emission of exhaust gases from the proposed heating device during the combustion of woodchips and beech–oak pellets were measured. It is demonstrated that the proposed design of the boiler equipped with intelligent control significantly reduces emissions when the biomass solid fuels are used, e.g., CO emissions from beech and oak chips and pellets in the low-emission boiler—18 extract pipes shows the value <100 ppm, which is even lower than when gas is burned in the other boilers; on the other hand, the pine chips show even higher emission when burned in the low-emission burner. Consequently, the choice of biomass source and form of the fuel play some role in the emissions observed.