Optimizations of the Conditions for Ceftobiprole Determination in a Complex Matrix

Abstract

A quick and accurate chromatographic–densitometric method for the determination of ceftobiprole in biological material (whole blood and urine) was developed. Preparation of the test sample required extraction of the drug from the matrix and was carried out by testing methanol or acetone as extracting agents, which were successfully used to isolate ceftobiprole from biological material. Under optimization of the procedure, various stationary and mobile phases were tested. Lastly, HPTLC cellulose plates and a mixture containing ethanol, 2-propanol, glacial acetic acid, and water in the ratio 4:4:1:3 (v/v/v/v) were chosen. Densitometric detection was made at a maximum absorbance of 316 nm. The developed method was validated; a linear function of the ceftobiprole concentration was obtained in the range of 2.4–72 µg/mL (r > 0.99) for both methanol and acetone solutions. The average accuracy of the devised method was measured at nearly 100%; nevertheless, the limit of the quantification was at 8.92 for methanol and 9.14 µg/mL for acetone solution. Therefore, the above method can be successfully used to ceftobiprole in biological material.