Abstract
During the global energy crisis, it is essential to improve the energy efficiency of pumps by adjusting the pump’s control strategy according to the operational states. However, monitoring the pump’s operational states with the help of external sensors brings both additional costs and risks of failure. This study proposed an interpolation method based on PN curves (power–speed curves) containing information regarding motor shaft power, speed, and flow rate to achieve high accuracy in predicting the pump’s flow rates without flow sensors. The impact factors on the accuracy of the estimation method were analyzed. Measurements were performed to validate the feasibility and robustness of the PN curve interpolation method and compared with the QP and back-propagation neural network (BPNN) methods. The results indicated that the PN curve interpolation method has lower errors than the other two prediction models. Moreover, the average absolute errors of the PN curve interpolation method in the project applications at 47.5 Hz, 42.5 Hz, 37.5 Hz, and 32.5 Hz are 0.1442 m3/h, 0.2047 m3/h, 0.2197 m3/h, and 0.1979 m3/h. Additionally, the average relative errors are 2.0816%, 3.2875%, 3.6981%, and 2.9419%. Hence, this method fully meets the needs of centrifugal pump monitoring and control.
Funder
Natural Science Foundation of Zhejiang Province
China Postdoctoral Science Foundation
Science and Technology Program of Zhejiang Province
Subject
Process Chemistry and Technology,Chemical Engineering (miscellaneous),Bioengineering
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献