Affiliation:
1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China
2. School of Mechanical and Electrical Engineering, Suqian University, Suqian 223800, China
Abstract
This study investigated the impact of electric pulse treatment (EPT) on the microstructure and mechanical properties of laser powder bed fused Inconel 718 (IN718). Through a comprehensive experimental characterization, we found that EPT induced significant improvements in the microstructure of IN718. In the YOZ plane of EPT-700, the molten pool diminished and replaced by a grain boundary with granular Ni3Nb precipitates, and the dislocations increased while the irregular porosity decreased. Concurrently, enhanced mechanical properties of EPT-700 were obtained, including a hardness of 354.7 HV, an ultimate tensile strength of 930.21 MPa, and an elongation of 34.35%. Fractographic analysis revealed a transition in fracture mechanisms, highlighting the intricate relationship between microstructural modifications induced by EPT and mechanical response under load. These findings underscore the potential of EPT as a promising post-processing technique for optimizing the microstructure and mechanical properties of IN718 components fabricated via laser powder bed fusion additive manufacturing. This study contributes to the advancement of knowledge in the field of additive manufacturing and provides valuable insights for the development of high-performance metallic components.
Funder
The China Postdoctoral Science Foundation