Affiliation:
1. Occupational Hygiene and Health Research Initiative (OHHRI), North-West University, Potchefstroom 2531, South Africa
Abstract
Additive manufacturing (AM) has been linked to potential exposure-related health risks, however, there is a paucity of sufficient research. This study aimed to supply information regarding emissions and exposure during directed energy deposition (DED) AM using inconel 718, with the main constituents being nickel, chromium, and cobalt. By using standardized occupational hygiene methods, the measurement strategy consisted of a combined approach, including powder characterization, particle emission monitoring, and personal exposure monitoring of AM operators. Powder characterization of virgin and used powder indicated no significant difference in particle size, shape, or elemental composition. Particle number emissions ranged between 102 and 105 p/cm3 for submicron particles (<1 µm in size). There was no significant difference in the particle emission rate between the three phases of AM or the two types of DED machines (p > 0.05). The particle emission rate for submicron particles peaked at 2.8 × 109 p/min. Metals of concern to human health were detected during the AM process but were considerably lower than the relevant exposure limits. This study confirms particle emissions, predominantly in the submicron range, above the background concentration during DED AM and, although insignificant in terms of potential health effects, AM operators are exposed to detectable concentrations of the metal constituents of inconel.
Funder
the South African Department of Science and Innovation (DSI) and forms part of the Collaborative Programme for Additive Manufacturing
Subject
Health, Toxicology and Mutagenesis,Public Health, Environmental and Occupational Health
Reference37 articles.
1. Characterizing particle emissions from a direct energy deposition additive manufacturing process and associated occupational exposure to airborne particles;Bau;J. Occup. Environ. Hyg.,2020
2. Dutta, B., Babu, S., and Jared, B. (2019). Science, Technology and Applications of Metals in Additive Manufacturing, Elsevier. [1st ed.].
3. (2021). Additive Manufacturing—General Principles—Fundamentals and Vocabulary. Standard No. ISO/ASTM 52900:2021.
4. 3-D printing: The new industrial revolution;Berman;Bus. Horizons,2012
5. Espach, A., and Gupta, K. (2020, January 10–14). Sustainability in Additive Manufacturing—A Review. Proceedings of the 5th NA International Conference on Industrial Engineering and Operations Management, Detroit, MI, USA. Available online: http://www.ieomsociety.org/detroit2020/papers/641.pdf.