A New Approach to Calorimetry in Space-Based Experiments for High-Energy Cosmic Rays
Author:
Bigongiari Gabriele, Adriani Oscar, Albergo Sebastiano, Ambrosi Giovanni, Auditore Lucrezia, Basti Andrea, Berti Eugenio, Bonechi Lorenzo, Bonechi Simone, Bongi Massimo, Bonvicini Valter, Bottai Sergio, Brogi Paolo, Cappello Gigi, Cattaneo Paolo, D’Alessandro Raffaello, Detti Sebastiano, Duranti Matteo, Fasoli Mauro, Finetti NoemiORCID, Formato Valerio, Ionica Maria, Italiano Antonio, Lenzi Piergiulio, Maestro Paolo, Marrocchesi Pier, Mori Nicola, Orzan Giulio, Olmi Miriam, Pacini Lorenzo, Papini Paolo, Pellegriti Maria, Rappoldi Andrea, Ricciarini Sergio, Sciuto Antonella, Silvestre Gianluigi, Starodubtsev Oleksandr, Stolzi Francesco, Suh Jung, Sulaj Arta, Tiberio Alessio, Tricomi Alessia, Trifirò Antonio, Trimarchi Marina, Vannuccini Elena, Vedda Anna, Zampa Gianluigi, Zampa Nicola
Abstract
Precise measurements of the energy spectra and of the composition of cosmic rays in the PeV region could improve our knowledge regarding their origin, acceleration mechanism, propagation, and composition. At the present time, spectral measurements in this region are mainly derived from data collected by ground-based detectors, because of the very low particle rates at these energies. Unfortunately, these results are affected by the high uncertainties typical of indirect measurements, which depend on the complicated modeling of the interaction of the primary particle with the atmosphere. A space experiment dedicated to measurements in this energy region has to achieve a balance between the requirements of lightness and compactness, with that of a large acceptance to cope with the low particle rates. CaloCube is a four-year-old R&D project, approved and financed by the Istituto Nazionale di Fisica Nucleare (INFN) in 2014, aiming to optimize the design of a space-borne calorimeter. The large acceptance needed is obtained by maximizing the number of entrance windows, while thanks to its homogeneity and high segmentation this new detector achieves an excellent energy resolution and an enhanced separation power between hadrons and electrons. In order to optimize detector performances with respect to the total mass of the apparatus, comparative studies on different scintillating materials, different sizes of crystals, and different spacings among them have been performed making use of MonteCarlo simulations. In parallel to simulations studies, several prototypes instrumented with CsI(Tl) (Caesium Iodide, Tallium doped) cubic crystals have been constructed and tested with particle beams. Moreover, the last development of CaloCube, the Tracker-In-Calorimeter (TIC) project, financed by the INFN in 2018, is focused on the feasibility of including several silicon layers at different depths in the calorimeter in order to reconstruct the particle direction. In fact, an important requirement for γ -ray astronomy is to have a good angular resolution in order to allow precise identification of astrophysical sources in space. In respect to the traditional approach of using a tracker with passive material in front of the calorimeter, the TIC solution can save a significant amount of mass budget in a space satellite experiment, which can then be exploited to improve the acceptance and the resolution of the calorimeter. In this paper, the status of the project and perspectives for future developments are presented.
Subject
General Physics and Astronomy
Reference11 articles.
1. The DArk Matter Particle Explorer mission 2. CALOCUBE: an approach to high-granularity and homogenous calorimetry for space based detectors 3. Calocube—A highly segmented calorimeter for a space based experiment 4. Fluka: A Multi-Particle Transport Code
http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.393.4720 5. A novel 3-D calorimeter for the High Energy cosmic-Radiation Detection (HERD) Facility onboard China’s Future Space Station;Dong;Proc. Sci.,2017
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
|
|