Synthesis and Properties of Octet NiCr Alloy Lattices Obtained by the Pack Cementation Process
-
Published:2023-01-28
Issue:3
Volume:13
Page:1684
-
ISSN:2076-3417
-
Container-title:Applied Sciences
-
language:en
-
Short-container-title:Applied Sciences
Author:
Zhao Peng12, Huang Deqing23, Zhang Hongmei1, Chen Weiwei1, Zhang Yongfu1
Affiliation:
1. School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China 2. Gaona Aero Material Co., Ltd., Beijing 100081, China 3. Beijing Key Laboratory of Advanced High Temperature Materials, Central Iron & Steel Research Institute, Beijing 100081, China
Abstract
NiCr alloys with different components were obtained by pack chromation and homogenization heat treatment of octet Ni lattice. The microstructure, alloy composition, microhardness and quasi-static compression properties of the NiCr lattice were tested. The results showed that after homogenization heat treatment, the NiCr alloy lattice had an austenitic structure with uniform composition. Compared with the pure nickel lattice, the microhardness, compressive strength, elastic modulus and energy absorption of the NiCr lattice increased with the increase of chromium content. The microhardness, specific strength, specific modulus and specific energy absorption of the Ni-45Cr alloy were 363 HV, 11.1 MP/(g/cm3), 1169.1 MP/(g/cm3) and 10 J/g, respectively, which were attributed to the solid solution strengthening provided by chromium and the increase in density. NiCr alloy lattices have high strength and toughness and may have potential applications in high-temperature filters or heat exchangers.
Subject
Fluid Flow and Transfer Processes,Computer Science Applications,Process Chemistry and Technology,General Engineering,Instrumentation,General Materials Science
Reference42 articles.
1. Ntintakis, I., and Stavroulakis, G.E. (2022). Infill Microstructures for Additive Manufacturing. Appl. Sci., 12. 2. Micro-architectured materials: Past, present and future;Fleck;Proc. R. Soc. A.,2010 3. Advanced Micro-Lattice Materials;Xiong;Adv. Eng. Mater.,2015 4. Zhang, K., Qu, H., Guan, H., Zhang, J., Zhang, X., Xie, X., Yan, L., and Wang, C. (2021). Design and Fabrication Technology of Metal Mirrors Based on Additive Manufacturing: A Review. Appl. Sci., 11. 5. Zhao, P., Huang, D., Zhang, Y., Zhang, H., and Chen, W. (2022). Microstructure and Properties of Hollow Octet Nickel Lattice Materials. Materials, 15.
|
|