Investigation of the Possibility of Tailoring the Chemical Com-Position of the NiTi Alloy by Selective Laser Melting

Abstract

In this work a study of the selective laser melting process of two NiTi alloys of equiatomic, and rich Ni composition were conducted. A study of the influence of the technological parameters on the alloy density was carried out. Values of technological parameters were obtained to ensure production of samples with the lowest number of defects. When using process parameters with the same energy density but different values of the constituent technological parameters, the amount of nickel carried away by evaporation changed insignificantly. An increase in the energy density led to an increase in the amount of nickel carried away, causing final samples with lower Ni content. When using multiple laser processing in the low-energy parameter set, it was possible to achieve a decrease in the nickel content in the alloy, similar to that with single high-energy processing. DSC studies showed a significant increase in transformation temperatures upon repeated laser processing due to the higher evaporation of nickel. The use of double laser treatment gave a decrease in the final density of the sample compared to a single treatment, but its value is still higher than when using a single treatment with a higher energy density.