Catalytic Biomass Transformation to Hydrocarbons under Supercritical Conditions over Nickel Supported on Schungite

Abstract

Liquid fuel production from biomass-derived molecules has received great attention due to the diminished fossil fuel reserves, growing energy demand, and the necessity of CO2 emission reduction. The deoxygenation of oils and fatty acids is a promising process to obtain “green” diesel. Herein, we report the results of the study of the deoxygenation of stearic acid to alkanes as a model reaction. Series of Ni-supported on schungite were obtained by precipitation in subcritical water (hydrothermal deposition) and for comparison via wetness impregnation followed, in both cases, by calcination at 500 °C and a reduction in H2 at 300 °C. The catalyst obtained via hydrothermal synthesis showed a three-fold higher specific surface area with a four-fold higher active phase dispersion compared to the catalysts synthesized via conventional impregnation. The catalysts were tested in stearic acid deoxygenation in supercritical n-hexane as the solvent. Under optimized process conditions (temperature of 280 °C, hydrogen partial pressure of 1.5 MPa, and 13.2 mol of stearic acid per mol of Ni), a close to 100% yield of C10–C18 alkanes, containing over 70 wt.% of targeted n-heptadecane, was obtained after 60 min of reaction.