Identification of Multi-Parameter Fluid in Igneous Rock Reservoir Logging—A Case Study of PL9-1 in Bohai Oilfield

Abstract

Since the “13th Five-Year Plan”, the exploration of large-scale structural oil and gas reservoirs in the Bohai oilfield has become more complex, and the exploration of igneous oil and gas reservoirs has become the focus of current attention. At present, igneous rock reservoir fluid identification methods are mainly based on the evaluation method of logging single parameter construction, which is primarily a qualitative identification due to lithology, physical property, and engineering factors. Accurate acquisition of interference logging data, and multi-parameter coupling and recording coupling methods are few, lacking systematic and comprehensive evaluation and analysis of logging data. Since conventional logging data in the study area have difficulty accurately and quickly identifying reservoir fluid properties, a systematic analysis was conducted of three factors: lithology, physical properties, and engineering, as well as a variety of logging parameters (gas measurement, three-dimensional quantitative fluorescence, geochemical, FLAIR, etc.) that can reflect fluid properties were integrated. Based on parameter sensitivity analysis, the quantitative characterization index FI of multi-parameter coupling fluid identification was established using the data from testing, sampling, and laboratory testing to develop the identification standard. The sensitivity analysis and optimization of characteristic parameters were carried out by integrating the data reflecting fluid properties such as gas surveys, geochemical data, and related logging data. Combined with gas logging-derived parameters and improved engineering parameters (the value of alkanes released by rock cracking per unit volume Cadjust, C1 abnormal multiple values, three-dimensional quantitative fluorescence correlation factor N), the fluid properties were identified, evaluation factors were constructed based on factor analysis, and fluid identification interactive charts were established. By analyzing test wells in the PL9-1 well area, the results of comparison test data are more reliable. Compared with conventional methods, this method reduces the dependence of a single parameter by synthesizing multiple parameters and reduces the influence of lithology, physical properties, and engineering parameters on fluid identification. It is more reasonable and practical. It can accurately and quickly identify the fluid properties of igneous rock reservoirs in the study area. It has a guiding significance for improving the accurate evaluation of logging data and increasing exploration benefits.