Effects of Fracture Parameters on VAPEX Performance: A Numerical and Experimental Approach Utilizing Reservoir-On-The-Chip
Author:
Rahimbakhsh Aria1, Torabi Farshid1
Affiliation:
1. Petroleum Systems Engineering, Faculty of Engineering and Applied Science, University of Regina, Regina, SK S4S0A2, Canada
Abstract
The present research carries out an in-detail study of the VAPEX process as one of the most recent solvent-based heavy oil recovery techniques in fractured reservoirs to evaluate the effect of fracture parameters on process performance. To achieve this purpose, several fractured patterns with distinct features were designed and engraved on glass pieces to manufacture state-of-the-art microfluidic models mimicking a typical Canadian heavy oil reservoir. A heavy oil sample of viscosity 1514 cP was utilized during the conducted experiments with pure propane and pure carbon dioxide as the injection solvents. A thorough image analysis operation was carried out over the experimental models to determine heavy oil produced, residual oil saturation, ultimate recovery factors, and monitor solvent chamber expansion. Numerical simulations of the same experiments were carried out for history matching and predicting other designed scenarios. Error analysis revealed average absolute errors of below 8%, showing convincing precision. Together with the simulation outcomes, a comprehensive data bank was obtained from the 30 scenarios designed and 18 VAPEX experiments conducted. The effects of fracture orientation, length, width, intensity, and position on process performance were identified and numerically evaluated. It was observed that all fractures, regardless of their properties, enhanced heavy oil recovery in comparison to the base case (no fractures) scenario. Moreover, propane proved more efficient owing primarily to its higher solubility and effective dispersion. The highest recovery factor, 65.81%, was obtained when implementing two wide vertical fractures on either side of the well pair. Almost equal to that, 64.93% was the process efficiency by positioning two long horizontal fractures between the wells.
Subject
Energy (miscellaneous),Energy Engineering and Power Technology,Renewable Energy, Sustainability and the Environment,Electrical and Electronic Engineering,Control and Optimization,Engineering (miscellaneous),Building and Construction
Reference37 articles.
1. James, L., Rezaei, N., and Chatzis, I. (2008). Vapex, Warm Vapex and Hybrid Vapex-the State of Enhanced Oil Recovery for in Situ Heavy Oils in Canada. J. Can. Pet. Technol., 47. 2. Das, S., and Butler, R. (1995, January 15–17). Extraction of Heavy Oil and Bitumen Using Solvents at Reservoir Pressure. Proceedings of the Technical Meeting/Petroleum Conference of the South Saskatchewan Section, Regina, SK, Canada. 3. Vapex: An Efficient Process for the Recovery of Heavy Oil and Bitumen;Das;SPE J.,1998 4. Singhal, A., Das, S., Leggitt, S., Kasraie, M., and Ito, Y. (1996, January 18–20). Screening of Reservoirs for Exploitation by Application of Steam Assisted Gravity Drainage/Vapex Processes. Proceedings of the International Conference on Horizontal Well Technology, Calgary, AB, Canada. 5. Lin, L., Ma, H., Zeng, F., and Gu, Y. (2014, January 10–12). A Critical Review of the Solvent-Based Heavy Oil Recovery Methods. Proceedings of the SPE Heavy Oil Conference-Canada, Calgary, AB, Canada.
|
|