Automatic Control of Chemolithotrophic Cultivation of Cupriavidus necator: Optimization of Oxygen Supply for Enhanced Bioplastic Production

Abstract

Gas fermentation is an upcoming technology to convert gaseous substrates into value-added products using autotrophic microorganisms. The hydrogen-oxidizing bacteria Cupriavidus necator efficiently uses CO2 as its sole carbon source, H2 as electron donor and O2 as electron acceptor. Surplus CO2 is stored in microbial storage material poly-(R)-3-hydroxybutyrate. O2 supply is the most critical parameter for growth and poly-(R)-3-hydroxybutyrate formation. A narrow O2 optimum between ~0.2 and ~4 mg/L was previously reported. Here, a standard benchtop bioreactor was redesigned for autotrophic growth of C. necator on explosive mixtures of CO2, H2 and O2. The bioreactor was equipped with mass flow control units and O2 and CO2 sensors. A controller for automated gas dosage based on a mathematical model including gas mass transfer, gas consumption and sensor response time was developed. Dissolved O2 concentrations were adjusted with high precision to 1, 2 and 4% O2 saturation (0.4, 0.8 and 1.5 mg/L dissolved O2, respectively). In total, up to 15 g/L cell dry weight were produced. Residual biomass formation was 3.6 ± 0.2 g/L under all three O2 concentrations. However, poly-(R)-3-hydroxybutyrate content was 71, 77 and 58% of the cell dry weight with 1, 2 and 4% dissolved O2, respectively.