Utilization of Carbon Dioxide via Catalytic Hydrogenation Processes during Steam-Based Enhanced Oil Recovery

Abstract

The concentration of carbon dioxide in the atmosphere has been increasing since immediately after the boom of industrialization. Novel technologies are required for carbon dioxide (CO2) capture, storage, and its chemical conversion into value-added products. In this study, we present a novel in situ CO2 utilization method via a hydrogenation process in the presence of nickel tallates during steam-based enhanced oil recovery. The light n-alkanes are the preferred products of in situ catalytic hydrogenation of CO2 due to their effective solubility, viscosity-reducing capacity, and hydrogen-donating capacity. A nickel tallate was evaluated for its carbon dioxide hydrogenation and oil-upgrading performance at 300 °C. The results showed that the content of saturated and aromatic fractions increased, while the content of heavier fragments decreased. Moreover, the relative content of normal C10–C20 alkanes doubled after the catalytic hydrogenation of CO2. Despite the noncatalytic hydrogenation of CO2, the viscosity was altered from 3309 mPa.s to 1775 mPa.s at a shear rate of 0.66 s−1. The addition of the catalyst further contributed to the reduction of the viscosity, down to 1167 mPa.s at the same shear rate. Thus, in situ catalytic hydrogenation of CO2 not only significantly reduces the concentration of anthropogenic carbon dioxide gas in the atmosphere, but it also enhances the oil-recovery factor by improving the quality of the upgraded crude oil and its mobility.