Water Resources and Water Quality Assessment, Central Bamyan, Afghanistan

Abstract

We surveyed and selectively sampled the major water sources in Bamyan city and the surrounding area to assess the water quality. Water quality measurements were taken in situ and more samples were collected for laboratory analysis from canals, rivers, springs, wells, and water supply systems. In urban areas, water supply systems provide 36% of the drinking water, but in rural areas, this source accounts for only 7% of drinking water supplies. Wells comprise 33% and 15% of urban and rural water supplies, respectively, while canals and rivers are modest water sources for Bamyan communities. Basic water quality parameters, such as pH, EC, and TDS, were variable with high values in some areas. Most of the samples fall in the range of potable water, but some had a high TDS and EC indicating that there is the potential of contamination. Values of pH were mostly were mostly in the range of drinking water (6.5–9.5). A Drinking Water Quality Index (DWQI) was calculated to better understand the water quality issues for the potable water supplies. Subsets of representative samples were analyzed for 17 selected chemical elements and other constituents. Barium (Ba) was detected in almost all of the water samples, while arsenic (As) was detected in about 9% of the analyzed samples, and this was mostly associated with thermal springs. Concentrations of Mn and Cu in some samples exceeded that of the water quality standards, while Zn concentrations were below tolerable limits in all of the samples. Most of the analyzed water samples were hard, and several samples showed evidence of microbial pollution in urban areas. Rivers originating from snow and glacier melting had excellent quality for drinking.