Abstract
Port design and approaches are usually carried out using real-time computer simulation methods for ship manoeuvring. So-called ship real-time simulation methods are relatively expensive, especially in terms of survey time. Several real-time simulation scenarios carried out by masters and pilots are usually performed, with several simulation attempts in each scenario. Each such attempt can last up to one hour, which, with a large number of scenarios, prolongs the research and increases its cost. Particularly time-consuming is the repetition of many scenarios with alternative solutions for infrastructure development and in various hydrometeorological conditions. To reduce the time-consuming of the tests, a new two-stage method was used to design the target approach on the modernized Port of Ustka. In the first stage, the simulations were carried out with significantly reduced floating navigation marking, and in the second stage with the target marking. Moreover, the so-called “Soft-Bank” method was introduced, i.e., the effects of a collision with the seabed and infrastructure were excluded. Such a solution leads to significant time benefits in conducting research and at the same time does not reduce confidence in the results obtained.
Subject
Ocean Engineering,Water Science and Technology,Civil and Structural Engineering
Reference43 articles.
1. Navigational Analysis of Ustka Modernization,2019
2. Pianc MarCom WG 121: Harbour Approach Channels–Design Guidelines
https://www.pianc.org/publications/marcom/harbour-approach-channels-design-guidelines
3. Pianc MarCom WG 158: Masterplans for the Development of Existing Ports
https://www.pianc.org/publications/marcom/masterplans-for-the-development-of-existing-ports
4. 1-99: Recommendations for the Design of the Maritime Configuration of Ports, Approach Channels and Harbour Basins,2007
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献