Superiority of Cellulose Non-Solvent Chemical Modification over Solvent-Involving Treatment: Application in Polymer Composite (part II)

Abstract

The following article debates on the properties of cellulose-filled ethylene-norbornene copolymer (EN) composites. Natural fibers employed in this study have been modified via two different approaches: solvent-involving (S) and newly developed non-solvent (NS). The second type of the treatment is fully eco-friendly and was carried out in the planetary mill without incorporation of any additional, waste-generating substances. Composite samples have been investigated with the use of spectroscopic methods (FT-IR), differential scanning calorimetry (DSC), static mechanical analysis, and surface-free energy measurements. It has been proved that the possible filler-polymer matrix interaction changes may occur due to the performed modifications. The highest reinforcement was evidenced for the composite sample filled with cellulose treated via a NS approach—TS = (34 ± 2) MPa, Eb = (380 ± 20)%. Additionally, a surface free energy polar part exhibited a significant increase for the same type of modification. Consequently, this could indicate easier wetting of the material which may contribute to the degradation process enhancement. Successfully developed cellulose-filled ethylene-norbornene copolymer composite compromises the rules of green chemistry and sustainable development by taking an advantage of renewable natural resources. This bio-inspired material may become an eco-friendly alternative for commonly used polymer blends.