Adsorption of Diphenolic Acid from Contaminated Water onto Commercial and Prepared Activated Carbons from Wheat Straw

Abstract

The fabrication of carbon materials from biomass residues can be a promising economical approach for absorbing various target pollutants from aqueous phase. In the study, the adsorption of diphenolic acid (DPA) is investigated on activated carbons fabricated from wheat straw (ACWS) and commercial-activated carbon cloth (CACC). Adsorption kinetics, isotherms, and operational variables (solution pH and ionic strength) are analyzed for the adsorption capacity of the DPA on both carbons. The results show that the ACWS has a higher surface area (1164 m2/g) and volume of micropores (0.51 cm3/g) than those of the CACC. The second-order kinetics model fitted the experiment data better than the first kinetics models with a lower percentage of deviation. The adsorption capacity of the ACWS (264.90 mg/g) is higher than the CACC (168.19 mg/g) because of the higher surface area and volume of micropores of the ACWS. The adsorption isotherm shows that the adsorption of the DPA on the ACWS and CACC is consistent with the Langmuir and Freundlich isotherm models, respectively. The pH has a significant effect on DPA adsorption onto both carbons. The adsorption process is favored at the acidic pH, but the presence of electrolytes has no effect on the adsorption capacity of both carbons due to the screening effect. Thus, the preparation of activated carbon from wheat straw is an attractive option to recycle the wheat straw to added-value materials that can be used for the removal of such pollutants from aqueous solution. These findings can increase the research knowledge about the management of different straws in a sustainable way to produce activated carbon for different applications.