A Fully-Encircled Polymerized Microfiber Bragg Grating by 3D Femtosecond Laser Nanofabrication

Abstract

Through the merits of the arbitrary three-dimensional (3D) fabrication ability and nanoscale resolution of two-photon polymerization, we demonstrated a fully encircled polymerized microfiber Bragg grating using 3D femtosecond laser nanofabrication. In order to generate strong enough polymer Bragg grating units around the microfiber surface, and to possess a possible smaller unit pitch and structure size, the composition of photoresist and grating dimensions were both experimentally optimized. A fast-curing, high-adhesion, great-heat-resistant acrylate monomer EQ4PETA was chosen as the cross-linking element, and a high-efficiency photoinitiator DETC was used. Along the tapered microfiber with a diameter of 2 microns, dozens of grating units of 300 nm thickness were successively fabricated. The resonance wavelength was approximately 1420 nm, with a unit pitch of 1 μm, slightly different with varying unit pitches. The refractive index sensitivity reached up to ~440 nm/RIU, which is much higher than other microfiber grating sensors. We also measured the temperature and strain sensitivity of this fully encircled microfiber Bragg grating, and this was estimated at 88 pm/°C and 6.3 pm/µε. It is foreseeable that with the continuous progress of fabrication technology, more highly integrated functional optical devices will emerge in the future.