Prototype of an IoT-Based Low-Cost Sensor Network for the Hydrological Monitoring of Landslide-Prone Areas

Abstract

Steep slopes covered by loose unsaturated pyroclastic deposits widely dispersed in Campania, Southern Italy, are often subjected to shallow landslides that turn into fast debris flows causing a large amount of damage and many casualties, triggered by heavy and persistent precipitation. The slope of Cervinara, located around 40 km northeast of Naples, was involved in a destructive flowslide between 15 and 16 December 1999, triggered by a rain event of 325 mm in 48 h. Hydrometeorological monitoring activities have been carried out near the landslide scarp of 1999 since 2017 to assess the water balance and to identify major hydrological processes involving the cover and the shallow groundwater system developing in the upper part of the underlying limestone fractured bedrock. Since 1 December 2022, a remotely accessible low-cost network has been installed to expand the field hydrological monitoring. The use of a network of low-cost capacitive sensors, communicating within the domain of Internet of Things (IoT) technology, aiming at dispersed monitoring of soil moisture, has been tested. Specifically, the tested prototype network allows measurements of the soil water content at two different points, communicating through a Wi-Fi-based IoT system using ESP32 boards. The ThingSpeakTM IoT platform has been used for remote field data visualization. Based on the obtained results, the prototype of this IoT-based low-cost network shows the potential to expand the amount of hydrological data, suitable for setting up early warning systems in landslide-prone areas.