Digital Twins-Assisted Design of Next-Generation Advanced Controllers for Power Systems and Electronics: Wind Turbine as a Case Study

Abstract

This paper proposes a novel adaptive controller based on digital twin (DT) by integrating software-in-loop (SIL) and hardware-in-loop (HIL). This work aims to reduce the difference between the SIL controller and its physical controller counterpart using the DT concept. To highlight the applicability of the suggested methodology, the regulation control of a horizontal variable speed wind turbine (WT) is considered for the design and assessment purposes. In the presented digital twin framework, the active disturbance rejection controller (ADRC) is implemented for the pitch angle control of the WT plant in both SIL and HIL environments. The design of the ADRC controllers in the DT framework is accomplished by adopting deep deterministic policy gradient (DDPG) in two stages: ( i ) by employing a fitness evaluation of wind speed error, the internal coefficients of HIL controller are adjusted based on DDPG for the regulation of WT plant, and ( ii ) the difference between the rotor speed waveforms in HIL and SIL are reduced by DDPG to obtain a similar output behavior of the system in these environments. Some examinations based on DT are conducted to validate the effectiveness, high dynamic performance, robustness and adaptability of the suggested method in comparison to the prevalent state-of-the-art techniques. The suggested controller is seen to be significantly more efficient especially in the compensation of high aerodynamic variations, unknown uncertainties and also mechanical stresses on the plant drive train.