Determination of Atorvastatin with Voltammetric Sensors Based on Nanomaterials

Abstract

This paper presents an accurate and fast electrochemical method for atorvastatin determination in pharmaceutical products. Two screen-printed sensors, one—carbon based (SPCE) and one based on carbon nanotubes and gold nanoparticles (AuNP-CNT/SPCE) were used during the electrochemical analyses. At all experimental stages, cyclic voltammetry was employed, both for the characterization of the sensors and their electrochemical behavior, and for quantitative determinations. AuNP-CNT/SPCE has showed an extended active area, higher intensity peaks, better reversibility and lower background current than the unmodified sensor. For atorvastatin quantification, a calibration curve has been developed within the 1.2–606.25 µM concentration range. A linearity relation between the current of the anodic peak and concentration has been obtained in the range 1.2–53.33 µMfor both sensors. With the AuNP-CNT/SPCE sensor, low values of limit of detection, LOD (1.92 × 10−7 M) and limit of quantification, LOQ (6.39 × 10−7 M) have been obtained, which demonstrates the feasibility of the method of determining atorvastatin from real samples. Atorvastatin amount has been successfully determined from pharmaceutical products using AuNP-CNT/SPCE. The results were similar to the manufacturer’s specifications regarding the dosage per tablet and to the concentrations obtained by applying the FTIR spectrometric method.