Leachability of Fast-Growing Wood Impregnated with Low Concentrations of Furfuryl Alcohol

Abstract

Furfurylation can effectively improve the quality of fast-growing wood, but its leachability is unclear. In this study, fast-growing poplar (Populus sp.) and Chinese fir (Cunninghamia lanceolata (Lamb.) Hook.) were impregnated with low concentrations of 5%–20% furfuryl alcohol (FA), and the chemical and microscopic changes during leaching tests were analyzed by UV spectra and confocal laser scanning microscopy (CLSM). The results show that FA impregnation can regulate the weight percentage gain, but its effectiveness in regulating the cell wall bulking coefficient decreased as the impregnation concentration was increased. Impregnation with 15% and 20% FA showed no significant difference in the effect on volume swelling efficiency. The inverse relationship between the concentration of FA and the leaching rate was demonstrated by leaching tests, UV spectra, and CLSM. Notably, the leaching rate of poplar and Chinese fir wood was more than 30% when impregnated with 5% FA. Although the entirety of the furfuryl alcohol was deposited in the cell wall when impregnated with low concentrations of FA, the binding was not stable. The weight percentage gain of furfurylated Chinese fir was greater than that of poplar, but its leaching rate was lower, indicating that the cured furfuryl alcohol resin in poplar was not as stable as that in Chinese fir. Therefore, differences in tree species should be considered in low-concentration FA impregnation, as the improvement effect of concentrations below 10% on the properties of fast-growing wood is weak and the leaching rate of FA is significant.