Passive Joint Emitter Localization with Sensor Self-Calibration

Abstract

This paper studies the problem surrounding distributed passive arrays (sensors) locating multiple emitters while performing self-calibration to correct possible errors in the assumed array directions. In our setting, only the angle-of-arrival (AoA) information is available for localization. However, such information may contain bias due to array directional errors. Hence, localization requires self-calibration. To achieve both, the key element behind our approach is that the received signals from the same emitter should be geometrically consistent if sensor arrays are successfully calibrated. This leads to our signal model, which is built on a mapping directly from emitter locations and array directional errors to received signals. Then we formulate an atomic norm minimization and use group sparsity to promote geometric consistency and align ‘ghost’ emitter locations from calibration errors. Simulations verify the effectiveness of the proposed scheme. We derive the Cramér Rao lower bound and numerically compare it to the simulations. Furthermore, we derive a necessary condition as a rule of thumb to decide the feasibility of joint localization and calibration.