Design and Performance of an Adsorption Bed with Activated Carbons for Biogas Purification

Abstract

Organic waste can be efficiently converted into energy using highly efficient energy systems, such as SOFCs coupled to the anaerobic digestion process. SOFC systems fed by biogenous fuels, such as biogas or syngas, suffer long-term stability due to trace compound impacts. It follows that, a mandatory gas cleaning section is needed to remove these pollutants at lower concentrations. This work investigates the adsorption mechanism for micro-contaminant removal through experimental results achieved using solid sorbents. Samples of different sorbent materials were analyzed in the laboratory to determine their performances in terms of sulfur (mainly hydrogen sulfide) and siloxanes (mainly D4-Octamethylcyclotetrasiloxane) adsorption capacities. The analysis shows that the chemical composition of the samples influences the adsorption of H2S (i.e., presence of calcium, iron, copper), while the effect of their textural properties mainly influences the adsorption of siloxane compounds, such as D4. A quantitative analysis was performed considering the influence of gas velocity on adsorption capacity. By increasing the biogas velocity (+45% and +89%), there was an indirect correlation with the H2S adsorption capacity (−27% and −44%). This identified an aspect related to the residence time required to be able to remove and retain the trace compound. The results obtained and summarized were used to develop a strategy for the removal of trace compounds in large-scale plants, e.g., for water purification.