Dielectric Responses of (Zn0.33Nb0.67)xTi1−xO2 Ceramics Prepared by Chemical Combustion Process: DFT and Experimental Approaches

Abstract

The (Zn, Nb)-codoped TiO2 (called ZNTO) nanopowder was successfully synthesized by a simple combustion process and then the ceramic from it was sintered with a highly dense microstructure. The doped atoms were consistently distributed, and the existence of oxygen vacancies was verified by a Raman spectrum. It was found that the ZNTO ceramic was a result of thermally activated giant dielectric relaxation, and the outer surface layer had a slight effect on the dielectric properties. The theoretical calculation by using the density functional theory (DFT) revealed that the Zn atoms are energy preferable to place close to the oxygen vacancy (Vo) position to create a triangle shape (called the ZnVoTi defect). This defect cluster was also opposite to the diamond shape (called the 2Nb2Ti defect). However, these two types of defects were not correlated together. Therefore, it theoretically confirms that the electron-pinned defect-dipoles (EPDD) cannot be created in the ZNTO structure. Instead, the giant dielectric property of the (Zn0.33Nb0.67)xTi1−xO2 ceramics could be caused by the interfacial polarization combined with electron hopping between the Zn2+/Zn3+ and Ti3+/Ti4+ ions, rather than due to the EPDD effect. Additionally, it was also proved that the surface barrier-layer capacitor (SBLC) had a slight influence on the giant dielectric properties of the ZNTO ceramics. The annealing process can cause improved dielectric properties, which are properties with a huge advantage to practical applications and devices.