Affiliation:
1. Laboratory of Wood Technology, Department of Materials and Environmental Technology, School of Engineering, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia
2. USDA Forest Service, Forest Products Laboratory, One Gifford Pinchot Drive, Madison, WI 53726, USA
Abstract
Soy is considered one of the most promising natural materials for manufacturing wood adhesives due to its low cost, high protein content, and ready availability. However, more cost-effective ways of improving its wet shear strength are needed to achieve wider market acceptance. Protein adhesive wet strength depends on the use of (typically expensive) crosslinking additives as well as the processing/denaturation of the protein. It has been commonly stated in the literature that protein denaturation leads to higher bond strength by activating the surface and exposing the reactive groups. Therefore, we investigated how differences in surface reactive groups (surface hydrophobicity and reactive amine groups) brought on with different denaturation treatments relate to bonding performance. Fourteen soy protein isolates (SPIs) with different denaturation histories were investigated. Characterization of the SPIs included surface hydrophobicity, surface amine content, extent of protein hydrolysis, and bond strength (wet and dry, with and without polyamidoamine epichlorohydrin (PAE) crosslinking agent) by ASTM D7998. The molecular weight patterns showed that proteins denatured by extensive hydrolysis had very low bond strengths. Adding the crosslinker, PAE, improved all the shear strength values. We found that the number of water-accessible reactive amine groups on protein surfaces had no impact on the adhesive strength, even with the amine-reactive crosslinker, PAE. Conversely, increased surface hydrophobicity was beneficial to adhesive strength in all cases, though this correlation was only statistically significant for wet strength without PAE. While, in general, denatured proteins are typically thought to form better bonds than native state proteins, this work suggests that it matters how proteins are denatured, and what surfaces become exposed. Denaturation by hydrolysis did not improve bond strength, and extensive hydrolysis seemed highly detrimental. Moreover, exposing hydrophobic surface groups was beneficial, but exposing covalent bond-forming reactive amine groups was not.
Funder
U.S. Department of Agriculture
U.S. Forest Service
United Soybean Board
Solenis LLC
Tallinn University of Technology
Baltic-American Freedom Foundation (BAFF) Research Scholar Program
Subject
Polymers and Plastics,General Chemistry
Reference57 articles.
1. Combinations of Soy Protein and Polyacrylate Emulsions as Wood Adhesives;Wang;Int. J. Adhes. Adhes.,2018
2. He, Z. (2017). Bio-Based Wood Adhesives, CRC Press. [1st ed.].
3. Wood Adhesives Based on Natural Resources: A Critical Review: Part I. Protein-Based Adhesives;Dunky;Prog. Adhes. Adhes.,2021
4. Early Uses of Soy Protein in Far East;Johnson;Inform,1984
5. Adhikari, B., Appadu, P., Chae, M., and Bressler, D. (2017). Bio-Based Wood Adhesives, CRC Press.