Fundamental Investigation for Processing of Pb-Cu-S-Bearing Materials

Abstract

The processing of polymetallic materials provides some challenges to every flowsheet. Within Aurubis Cu-Pb-metallurgical flowsheet, a broad range of raw materials and intermediates are processed. Continuous improvements are required to adapt the flowsheet according to the changing material quantity and quality. Therefore, thermodynamic modeling is the desired and most efficient way to conduct scenario analysis. Hence, databases and software are becoming better and better as the acceptance of this method increased. Further understanding is promoted by conducting experimental test work to validate the calculated results. In this research work, the impact of various oxygen potential on the formation of the condensed phases’ slag, matte, speiss and crude lead were investigated. A frequent check of slag metallurgy, in particular, the iron and lead concentration, provide feedback if the metallurgical process is operating at the right oxygen potential. Following, the calculated distribution coefficients for Cu, Pb, As, Sb, Sn and Ni between matte/speiss and speiss/lead are discussed.