Study of Structure and Phase Transformations in Rejuvenated Rapidly Quenched TiNiCu Alloys

Abstract

Alloys of the quasibinary TiNi-TiCu system manufactured by melt quenching in the form of thin 20–50 μm ribbons have proven to show good potential as materials for the fabrication of micromechanical devices. At high cooling rates (about 106 K/s), this method allows producing high-copper (more than 20 at.%) amorphous alloys which exhibit an excellent shape-memory effect after crystallization. Their properties are known to largely depend on the crystallization conditions and the structure of the initial amorphous material acting as a precursor for the formation of crystal phases. It has been shown recently that the rejuvenation procedure (cryogenic thermocycling) of metallic glasses is one of the most promising methods of improving their properties. In this study, we investigated for the first time the effect of cryogenic thermocycling of rapidly quenched amorphous TiNiCu on the initial state, as well as on structure formation and the phase transformation patterns of subsequent crystallization conducted using various methods. The effect was analyzed utilizing the methods of scanning and transmission electron microscopy, X-ray diffraction analysis, and differential scanning calorimetry. The results show that rejuvenation treatment slightly reduces the glass transition and crystallization onset temperatures and moderately changes the sizes of structural features (grains, martensite plates), the quantity of the martensite phase, and the characteristic temperatures and enthalpy of the martensitic transformation.