Biodiesel Production Using Bauxite in Low-Cost Solid Base Catalyst Precursors

Abstract

Investigation was conducted on bauxite mixed with Li2CO3 as alkali metal catalysts for biodiesel production. Bauxite contains a high percentage of Si and Al compounds among products. Because of the high expense of commercial materials (SiO2, Al2O3) that makes them not economical, the method was very recently improved by replacing commercial materials with Si and Al from bauxite. This is one of the easiest methods for preparing heterogeneous transesterification catalysts, through one-pot blending, grinding bauxite with Li2CO3, and heating at 800 °C for 4 h. The prepared solid-base alkali metal catalyst was characterized in terms of its physical and chemical properties using X-ray powder diffraction and field-emission scanning electron microscopy (FE-SEM). The optimal conditions for the transesterification procedure are to mix methanol oil by molar ratio 9:1, under 65 °C, with catalyst amount 3 wt.%. The procedure is suitable for transesterifying oil to fatty acid methyl ester in the 96% range.