Testing System for PV Grid-Connected Power Condition Systems with Support for Ancillary Services

Abstract

Due to the high spread of photovoltaic (PV) systems in the low voltage distribution grids there is a substantial number of requirements for the connection of these systems. Therefore, several tests should be performed before the integration of the PV systems into the grid. Moreover, new requirements have been established that are most likely to be implemented in the near future. To provide these tests and verify if PV systems are in accordance with requirements and recommendations, a testing setup for the PV systems was developed. This testing system consists of a controllable power source prepared to receive energy and to inject it into the grid. In fact, that system imposes a controllable voltage, in amplitude and frequency, to the PV system to simulate the perturbations of the grid. Since the system under test must inject energy in accordance with the standards’ specifications, then the controllable power source that emulates the grid must receive that energy. Moreover, it should also be prepared for PV systems that are able to provide ancillary services, including new ones that support imbalanced networks. A fast and robust control system will be used for this controllable power source. Several experimental tests from the developed prototype are presented.