Recycling of Plastics as a Strategy to Reduce Life Cycle GHG Emission, Microplastics and Resource Depletion
-
Published:2023-07-25
Issue:15
Volume:15
Page:11529
-
ISSN:2071-1050
-
Container-title:Sustainability
-
language:en
-
Short-container-title:Sustainability
Author:
Gabisa Elias W.1234ORCID, Ratanatamskul Chavalit4ORCID, Gheewala Shabbir H.12ORCID
Affiliation:
1. The Joint Graduate School of Energy and Environment, King Mongkut’s University of Technology Thonburi, 126 Pracha Uthit Road, Bangkok 10140, Thailand 2. Centre for Energy Technology and Environment (CEE), Ministry of Higher Education, Science, Research and Innovation, Bangkok 10400, Thailand 3. Faculty of Chemical and Food Engineering, Bahir Dar Institute of Technology, Bahir Dar University, Bahir Dar 6000, Ethiopia 4. Department of Environmental Engineering, Chulalongkorn University, Bangkok 10330, Thailand
Abstract
Plastic waste is the most challenging type of waste because its generation rate (consumption rate) is high, and the current recycling rate is low. The increase in the production and disposal of plastics has led to significant environmental problems including greenhouse gas (GHG) emissions, microplastic pollution, and resource depletion. The study aimed at quantifying the potential environmental effects reduction achieved by recycling the most widely consumed polymers. One approach to establishing a circular economy for plastics is recycling. Plastic recycling as a strategy to reduce life cycle GHG emissions, microplastic emissions, and resource depletion was investigated. Life cycle assessment methodology was employed, considering cradle-to-gate as a system boundary. The results showed that recycling can significantly reduce life cycle GHG emissions and resource depletion. Replacing the virgin material with recycled material reduces the emission to −67 MtCO2e. Recycling could have saved 56.8 million microplastic emissions per year. However, mechanical recycling, which is commercialised nowadays, contributed to an increase in microplastics as much as 2.4 × 109 million particles per year. Recycling will also save about 50 million tonnes of resources from depletion worldwide by recycling around 20 Mt plastics. However, microplastic emissions reduction in the present scenario of mechanical recycling is not possible unless other mechanisms to capture the emitted microplastics are introduced or other recycling methods, such as chemical recycling, are employed.
Subject
Management, Monitoring, Policy and Law,Renewable Energy, Sustainability and the Environment,Geography, Planning and Development,Building and Construction
Reference43 articles.
1. Plastics, the Environment and Human Health: Current Consensus and Future Trends;Thompson;Philos. Trans. R. Soc. B Biol. Sci.,2009 2. Kaza, S., Yao, L., Bhada-Tata, P., and Van Woerden, F. (2018). What a Waste 2.0: A Global Snapshot of Solid Waste Management to 2050, World Bank Publications. 3. Microplastics En Route: Field Measurements in the Dutch River Delta and Amsterdam Canals, Wastewater Treatment Plants, North Sea Sediments and Biota;Leslie;Environ. Int.,2017 4. Plastic Additives as Tracers of Microplastic Sources in Japanese Road Dusts;Kitahara;Sci. Total Environ.,2020 5. Kumar, R., Verma, A., Shome, A., Sinha, R., Sinha, S., Jha, P.K., Kumar, R., Kumar, P., and Das, S. (2021). Impacts of Plastic Pollution on Ecosystem Services, Sustainable Development Goals, and Need to Focus on Circular Economy and Policy Interventions. Sustainability, 13.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献
1. Biotechnological Solutions for Recycling Synthetic Fibers;The 4th International Electronic Conference on Applied Sciences;2023-11-17
|
|