Abstract
Four titanium alloys (Ti-Ta, Ti-Ta-Sn, Ti-Ta-Mn, and Ti-Nb-Sn) were synthesized by mechanical alloying (MA) in a planetary mill in different times between 2 h and 100 h. The microstructure characterization was made by X-ray diffraction (XRD), in which the Rietveld method was applied to analyze the diffraction patterns. The study demonstrated that after short milling times between 2 h and 30 h, the fraction of hexagonal close-packed (hcp) phase decreases; at the same time, the formation of body-centered cubic (bcc) and face-centered cubic (fcc) Ti phases are promoted. Additionally, after 30 h of MA, the full transformation of hcp-Ti was observed, and the bcc-Ti to fcc-Ti phase transformation took place until 50 h. The results suggest that the addition of Ta and Sn promotes the fcc-Ti phase formation, obtaining 100% of this phase at 50 h onwards, whereas Nb and Mn show the opposite effect.
Subject
General Materials Science,Metals and Alloys
Reference108 articles.
1. Less Common Nonferrous Metals
2. Titanium: Physical Metallurgy, Processing, and Applications;Froes,2015
3. Materials Properties Handbook—Titanium Alloys: 17.7 High-Temperature Strength;Boyer,1994
4. Titanium Alloys: Part 1—Physical Metallurgy and Processing;Bhattacharjee,2017
5. High-Temperature Titanium Alloys—A Review
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献