Analysis of the Manufacturing Variables of Binderless Panels Made of Leaves of Olive Tree (Olea europaea L.) Pruning Waste

Abstract

While the construction industry consumes more raw materials than any other industrial sector, agriculture generates a large amount of waste that is not managed properly. The olive industry produces more than 7.5 million tons of waste that could be recovered. This paper presents a new method to valorize the leaves of olive tree pruning waste consisting of the manufacture of ecologic boards without adhesives by hot pressing. In order to analyze their influence, three manufacturing variables were varied to obtain the boards: leaf type (shredded and whole leaves), temperature (130, 140 and 150 °C) and time (4, and 12 min). Twenty-four boards were made and were then tested for their mechanical, physical and thermal properties according to the EN standards. The boards showed good results of thickness swelling (TS), water absorption (WA) and of thermal conductivity and can be used as an alternative for manufacturing thermal insulation boards. With a smaller particle size of shredded leaves, longer pressing times and higher pressing temperatures, the mechanical behavior of the boards could improve. The olive leaves are a low-cost renewable resource, and manufacturing products with a long, useful life can be beneficial to the environment.