Modeling of Burst Impulse Noise Errors in an In-House M-QAM-Based Power Line Communications Channel Using the Fritchman

Modeling of Burst Impulse Noise Errors in an In-House M-QAM-Based Power Line Communications Channel Using the Fritchman–Markov Model

Published:2023-07-25 Issue:15 Volume:23 Page:6659
ISSN:1424-8220
Container-title:Sensors
language:en
Short-container-title:Sensors

Author:

Iyiola Akintunde O.¹^ORCID,Familua Ayokunle D.¹^ORCID,Swart Theo G.¹^ORCID,Shongwe Thokozani²^ORCID

Affiliation:

1. Department of Electrical and Electronic Engineering Science, University of Johannesburg, Auckland Park, P. O. Box 524, Johannesburg 2006, South Africa

2. Department of Electrical and Electronic Engineering Technology, University of Johannesburg, Doornfontein, P. O. Box 17011, Johannesburg 2028, South Africa

Abstract

Within the power line communication (PLC) network, a large number of electronic devices are connected, and environmental factors can cause unusual behavior, leading to high-amplitude impulse noise in the received signal and, as a result, packet losses and burst errors in the data that are sent. Burst errors make it difficult to send data over power line channels efficiently and accurately. Analyzing error patterns with intelligent techniques can provide valuable insights into data transmission efficiency, enhance transmission quality, and optimize PLC systems. This research proposes a three-state Fritchman–Markov chain-based power line communication error model and develops a software-defined PLC system. The goal is to analyze and model the system’s statistical error process. The PLC system’s fundamental error pattern is deduced from the transmission and reception of data on our software-defined (SD) PLC platform. The system is designed with multi-state quadrature amplitude modulation (M-QAM) data transmission and reception techniques. An error pattern consisting of 50,000 bits is obtained by comparing the bits transmitted with those received using the in-house M-QAM-based PLC transceiver system. The error characteristics of the newly developed M-QAM SD-PLC system are precisely modeled using the error model. Examining the burst error statistics of the reference error sequences of the SD-PLC system and the three-state Fritchman–Markov error model reveals striking similarities. According to the results, the error model accurately represents the error characteristics of the developed M-QAM SD-PLC system. The proposed three-state Fritchman–Markov chain-based error model for PLC has the potential to provide a comprehensive understanding of the error process in PLC. Additionally, it can assess error control strategies with less computational complexity and a shorter simulation time.

Publisher

MDPI AG

Subject

Electrical and Electronic Engineering,Biochemistry,Instrumentation,Atomic and Molecular Physics, and Optics,Analytical Chemistry

Link

https://www.mdpi.com/1424-8220/23/15/6659/pdf

Reference45 articles.

1. Baraboi, B. (2013). Narrow Band Power Line Communication, Applications and Challenges, Ariane Controls, Inc.

2. Haidine, A., Tabone, A., and Müller, J. (2013, January 24–27). Deployment of Power Line Communication by European Utilities in Advanced Metering Infrastructure. Proceedings of the 2013 IEEE 17th International Symposium on Power Line Communications and Its Applications, Johannesburg, South Africa.

3. Yang, C., and Zhang, Z. (2018, January 28–30). Intelligent Home System Design Based on Power Line Communication. Proceedings of the 2nd International Conference on Telecommunications and Communication Engineering, Beijing, China.

4. Chung, Y.M. (2020, January 19–22). Overview and Characteristics of IoT PLC. Proceedings of the 2020 International Conference on Electronics, Information, and Communication (ICEIC), Barcelona, Spain.

5. A new communication system based on OFDM in coal mine underground;Wenxing;Proceedings of the 2005 Asia-Pacific Microwave Conference Proceedings,2005