Isothermal Adsorption Properties for the Adsorption and Removal of Reactive Blue 221 Dye from Aqueous Solutions by Cross-Linked β-Chitosan Glycan as Acid-Resistant Adsorbent

Abstract

Dye effluent causes serious pollution and damage to the environment and needs a series of treatments before it can be discharged. Among the numerous effluent treatment methods, adsorption is the simplest and does not cause secondary pollution. Bio-adsorbents are especially advantageous in the treatment of low-concentration dye effluent. In this study, the adsorption and removal capacities of unmodified α- and β-chitosan and modified β-chitosan (β-chitosan cross-linked with triethylenetetramine, BCCT) on C.I. Reactive Blue 221 (RB221) dye were compared. The experiments were performed on the adsorption of the RB221 dye by unmodified α- and β-chitosan and cross-linkage–modified BCCT at different temperatures and for different durations, which are presented along with the relevant adsorption kinetics calculations. According to the results, as the temperature increased from 303 to 333 K, the initial adsorption rates of the adsorbents, α-chitosan, β-chitosan, and BCCT, for the RB221 dye, changed from 1.01 × 102, 4.74 × 102, and 1.48 × 106 mg/g min to 5.98 × 104, 4.23 × 108, and 1.52 × 1013 mg/g min, respectively. BCCT thus showed the best adsorption for the dye at all temperatures from the Elovich model. These results confirmed the successful introduction of a polyaminated and cross-linked extended structure as a modification for the BCCT adsorbent, which makes it resistant to acid hydrolysis and gives it the functional amine group for dye adsorption, thereby promoting the ability of BCCT to adsorb dyes under strongly acidic conditions. The compound synthesized in this study is expected to be a good choice in the future for purifying strongly acidic effluent containing anionic organic dyes.