Affiliation:
1. Institute of Micro-Process-Engineering and Particle Technology (IMiP), University of Applied Sciences Trier, Environmental Campus Birkenfeld, P.O. Box 1380, D-55761 Birkenfeld, Germany
Abstract
The research program “Engineered Artificial Minerals (EnAM)” addresses the challenge of recycling valuable elements from battery waste streams. These elements, such as lithium (Li), often migrate in the slag phase, in some cases as crystals. EnAM crystals represent concentrated reservoirs of these elements, which can only be effectively recycled if they are extracted from the slag matrix and then separated. Selective wet agglomeration is a separation process based on a three-phase system and is often used in coal and ore processing. The produced agglomerates in this process can be easily separated from the remaining suspension. The precise quantification of the wetting properties and adhesion strength between suspended particles and binding liquid droplets is a scientific challenge. An accurate technique suitable for adhesion force measurements in three-phase systems with micrometer-scale particles is Fluidic Force Microscopy (FluidFM®). An experimental setup with optical control is being developed to measure adhesion forces between droplets and flat/rough surfaces. This will enable precise measurements of adhesion forces between solid EnAM crystals and binding liquid droplets. Based on these measurements, optimal agglomeration conditions can be selected in the future to improve selective wet agglomeration with respect to recycling processes.
Funder
German Research Foundation
Subject
Process Chemistry and Technology,Chemical Engineering (miscellaneous),Bioengineering
Reference26 articles.
1. Phase composition of high lithium slags from the recycling of lithium ion batteries;Elwert;World Metall.-Erzmetall,2012
2. Velázquez-Martínez, O., Valio, J., Santasalo-Aarnio, A., Reuter, M., and Serna-Guerrero, R. (2019). A Critical Review of Lithium-Ion Battery Recycling Processes from a Circular Economy Perspective. Batteries, 5.
3. Cattermole, A.E. (1904). Classification of the Metallic Constituents of Ores. (No. US763259A), U.S. Patent.
4. Wettability of porous surfaces;Cassie;Trans. Faraday Soc.,1944
5. Wetting and adhesive forces on rough surfaces—An experimental theoretical study;Fritzsche;Procedia Eng.,2015